|
|
Post by tony811976 on Mar 10, 2007 9:01:35 GMT
just notice the specs say the seat is adjustable. i havent looked at the bike yet is is easy to do and what does it do.?
|
|
|
|
Post by Matt on Mar 10, 2007 10:03:53 GMT
Hi Tony Yeah, what you have to do is: At the rear of the bike you will see that the subframe is held on by one bolt on each side. There are two holes either side of these. All you have to do is take the bolts out, and put them in a different whole to adjust the position. It just litterally lifts/changes the angle of the subframe. You will have to experiment to see which setting suits you best. Ive taken a pic so you can see:  Hope this helps! |
|
|
|
Post by tony811976 on Mar 10, 2007 21:09:58 GMT
well well well . cheers that simple lol
|
|
faucon
Stabilisers
!esreveR
Posts: 56
|
Post by faucon on Mar 11, 2007 2:25:56 GMT
i try to play whit the ajustable seat feature. i realize that whatever the seting, the seat always have the same position. that mean you only make the seat more or less rigid. it will help depend on track to have less or more flex into the frame. i always ride at middle since i never hang at the track that long. you may try a "other position", for one, the pipe go hit the seat and the other one of the cylinder head bolt. but whit decent spacer, a friend just put the seat high and more at back.
|
|
